FULL-SERVICE, TURN-KEY MATERIAL HANDLING SOLUTION PROVIDER

Stackout & Reclaim

coal-reclaim

Fugitive dust is usually generated during unloading, stackout, reclaim and crushing operations. These dust emissions can be a safety hazard and environmental nuisance, and can increase maintenance of material handling equipment. MinTech’s highly-concentrated blends, formulated to enhance the dust suppression capabilities of water, promote agglomeration, which prevents particles from becoming airborne.

products

coaltrol60 (catalog)

Coaltrol 60

Low-moisture, foamable dust suppressant.  Formulated with super wetting surfactant chemistry to control dust in unloading, transfer, and storage of coal, flyash, and other friable minerals. Exhibits binding properties that provide extended dust suppression both downstream of the application point and during storage. Concentrated formulation dilutes as much as 1:125 for typical applications.

  • Forms a wet, tacky, hydroscopic film upon curing
  • Typically provides 15 to 25 days residual dust suppression
  • Does not impact burn characteristics or flyash composition
  • Reduces the number of application points required to control your dust problems
  • The added binding agent allows for extended dust control in plant, rail, and barge application areas
REQUEST PRODUCT INFORMATION

 

REQUEST QUOTE

tm11517coaltrolf430 (catalog)

CoalTrol F430

High-expansion foam provides maximum coverage with minimal moisture addition, signicantly reducing water consumption. Fortfied with Flame Freeze Anti-Oxidant Spontaneous Combustion Inhibitor. Produces a dust-encapsulating foam that is ideal for a variety of applications including foam cleaning, coal transfer houses, coal crushing, coal storage, and other areas where coal dust is created. The low-moisture foam properties reduce BTU loss and reduce the risk of shorting out electrical components during on-line facility cleaning applications. Unique cationic surfactant chemistry attracts negatively charged coal dust particles, improving cleaning and dust reduction compared to conventional nonionic and anionic chemistries.

• Non-corrosive, neutral pH, and environmentally-friendly.
• Super wetting chemistry binds dust nes together, reducing fugitive dust emissions.
• Dilutes up to 1:400 with hard and soft water and can be used in most air-driven foam machines.
• Long-lasting foam reduces the number of application points required to control process dust problems.
• Perfect for removing dusts from walls and equipment as well as from oors, ducts, pipes, hoods, ledges, beams, and other horizontal surfaces.
• Anti-static properties dissipate electrostatic energy on treated surfaces and anti-oxidant properties scavenge free radicals to help prevent the conditions that lead to explosions in coal dust areas.

REQUEST PRODUCT INFORMATION

 

REQUEST QUOTE

coaltrolf65 (catalog)

CoalTrol F65

A residual surfactant-based product used to control dust in unloading, transfer, and storage of coal, y ash, and other friable minerals. Contains Momar’s exclusive Flame Freeze anti-oxidant spontaneous combustion elimination technology.

• Exhibits binding properties that provide extended dust suppression both downstream of the application point and during storage.
• Typically provides 60 days residual dust suppression and 60 days residual spontaneous combustion reduction.
• Forms a tacky, hydroscopic film upon curing.
• Reduces the number of application points required to control your dust problems (reduces the number of chemical application points when transferring coal to silos or bunker areas).
• Freeze thaw stable and heat stable up to 120° F.
• The added binding agent allows for extended dust control in plant, rail, and barge application areas.
• Reduces moisture exchange and scavenges free radicals to inhibit exothermic reactions that lead to hot spots and fires in coal storage.

REQUEST PRODUCT INFORMATION

 

REQUEST QUOTE

coaltrolcomplete (catalog) 2

CoalTrol Complete

 

Solve material handling and storage challenges of lower rank coals by eraiducation spontaneous combustion, preventing coal from freezing, and controlling dust with an all-in-one solutions. Full-body treatment fortified with residual binders, humecatants, freeze protectants, and spontaneous combustion inhibitors, answers the industry’s need for complete coal management.

• Humectant qualities aid in dust control by enhancing moisture retention
• Binders provide long residual dust control making coal handling and storage safer and easier
• Improves air quality and increases worker safety and visibility
• Excellent clingability to vertical surfaces and high lubricity
in cold temperatures enhance performance and resist washout
• Provides freeze protection down to -48°F (-44°C)
• Retards coal oxidation and controls evaporation rates, preventing spontaneous combustion

REQUEST PRODUCT INFORMATION

 

REQUEST QUOTE

coaltrol65 (catalog)

Coaltrol 65

High-coverage, sprayable dust suppressant.  Formulated with super wetting surfactant chemistry to control dust in unloading, transfer, and storage of coal, flyash, and other friable minerals. Exhibits binding properties that provide extended dust suppression both downstream of the application point and during storage. Concentrated formulation dilutes as much as 1:125 for typical applications.

  • Forms a wet, tacky, hydroscopic film upon curing
  • Typically provides 15 to 25 days residual dust suppression
  • Does not impact burn characteristics or flyash composition
  • Reduces the number of application points required to control your dust problems
  • The added binding agent allows for extended dust control in plant, rail, and barge application areas
REQUEST PRODUCT INFORMATION

 

REQUEST QUOTE

foam picture

Coaltrol 430

Foamable product containing wetting agents used to control dust in the unloading, transfer, and storage of coal and other friable materials.  High-expansion foam provides maximum coverage with minimal moisture addition in order to reduce BTU loss.  Execellent for process coal dust as well as facility wash down applications.  Compatible with Momar’s FoamMaxx Portable Wash Down System and with Momar’s Freedom Foamer Wall-Mounted Wash Down Station.

  • Super wetting chemistry binds coal fines to larger lump coal, reducing fugitive dust at the application point and downstream at the point of storage
  • Long-lasting foam reduces the number of application points required to control dust problems
  • Non-corrosive, biodegradable, chloride-free, and phosphate-free
  • For use on conveyors, transfer belts, booms, chutes, and feed lines
  • Dilutes 1:100 – 1:400 and applied at 0.3 – 0.7 gallons of solution per ton, typically
  • When applied to vertical surfaces, the dry foam “walks” down the wall carrying fines and soils with it
REQUEST PRODUCT INFORMATION

 

REQUEST QUOTE

cementrol55 catalog

Cementrol 55

Concentrated foamable product used to control process dust generated during the conveying, transfer, and stack out of clinker in the Portland Cement manufacturing process.

  • Will not affect the aeration or compressive strength characteristics of Portland Cement as per ASTM Method C465-85a
  • Can be used through foam generation equipment
REQUEST PRODUCT INFORMATION

 

REQUEST QUOTE