FULL-SERVICE, TURN-KEY MATERIAL HANDLING SOLUTION PROVIDER

ROADS

pennzsuppress_ramco

Damage and erosion of the road surface by excessive watering and heavy traffic can result in unstable driving surfaces and dangerous driving conditions.  Worn out roads produce high levels of fugitive dust emissions that result in human and animal health issues, damage to crops, excessive tire wear, and reduced equipment life.  MinTech offers proven dust control programs to stabilize unpaved road surfaces and reduce road dust by 95%, even on heavily traveled haul roads.

products

pennzsuppressd (catalog)

Resinator

Water-proof road and soil enhancer.  A concentrated blend of unique, asphaltene-free resins that thrive under the stresses that shear other chemistries.  Penetrates even hard-packed roads to stabilize the driving surface, improving driving conditions while reducing dust, pot-holing, wash-boarding, silt-runoff, and aggregate loss.  Mixes easily “in-tank” for application with any water truck.  Because it is formulated for use in and around sensitive habitats, Resinator is an environmentally sound solution for dust control and soil retention needs.

  • Unique — Patented formulation containing a US-sourced paraffin resin
  • Durable — Reduces airborne dust by 90% even after 10,000 vehicle passes
  • Cost-effective — Low application rates of 0.15 – 0.25 gallons per square yard, typically
  • Long-lasting — Up to 6 months after initial application and just 1 maintenance application
  • Saves money — fewer applications means a significant decrease in fuel costs, labor costs, and water usage
  • Environmentally friendly — Certified by dozens of state environmental agencies
REQUEST PRODUCT INFORMATION

REQUEST QUOTE

tm15509dustnotsyn (catalog)

DUSTNOT SYN

An ultra-pure, food-grade dust suppression liquid that never dries.  This 100% synthetic fluid is non-flammable, non-corrosive, non-toxic, non-petroleum, and non-aqueous.  Does not mix with water, and should be applied “as is” without any dilution, heating, or mixing.  For use in a variety of process applications where water is prohibited – typical process application rates range from 0.5 – 10 pounds per ton, depending on the material and conditions.  For use on a variety of surface applications where long-term fugitive dust suppression is desired – typical surface application rates range from 0.15 – 1.5 gals per square yard for roads, pads, piles, slopes, and berms.

  • Environmentally responsible — non-evaporative, non-leaching, and oil-sheen free if overspray contacts water
  • Effective — controls fugitive dust emmissions up to 98%, especially respirable dust particles PM2.5 – PM10
  • Versatile — great for sand, clay, soil, gravel, limestone, aggregates, fertilizer, mixed aggregates, and other friable materials
  • Compatible — apply with any equipment capable of water spray at temperatures down to – 40°F (-40°C)
  • Durable — UV resistant, extreme temperature resistant, oxidation resistant, and water resistant
  • Unique GTL* technology — reworkable, self-healing, clear, colorless, odorless, non-filming, non-crusting liquid
  • User-friendly — non-tracking and non-transferable on tire treads

*GTL – Gas-To-Liquid Technology transforms natural gases from the Earth into ultra-pure synthetic-organic liquids.  Patents 8,968,592 and 9,068,106

 

REQUEST PRODUCT INFORMATION

REQUEST QUOTE

DUSTNOT 33 (catalog)

DUSTNOT 33

Lignin-fortified dust control and soil stabilizer concentrate. Formulated with a synergistic blend of partially neutralized lignins and high-performance wetting agents. Provides dust control to roads, equipment yards, fly ash ponds, coal piles, parking lots, and other surfaces that become very dusty in dry conditions.

  • Dilutes 1:5 with water
  • Biodegradable, all-natural, and non-toxic
  • Dark brown when applied, almost black after curing
  • Remains flexible even under extremely dry conditions
  • Non-flammable, non-corrosive, and safe around sensitive environments
REQUEST PRODUCT INFORMATION

REQUEST QUOTE

dustnotigc (catalog)

DUSTNOT IGC

Humectant-fortifed dust control and soil stabilizer concentrate. Synergistic blend of calcium chloride, glycerols, and high-performance wetting agents
to provide dust control on roads, equipment yards, y ash ponds, coal piles, parking lots, and other surfaces that become very dusty in dry conditions. DustNot IGC’s hydroscopic properties help control moisture levels and
prevent dusting during dry periods or between dust suppression treatments. Hardens and compacts treated surfaces with repeated applications.

  • Dries clear and colorless
  • Inherently hydroscopic to raise soil moisture
  • Safe for use in and around sensitive habitats
  • Application rate ranges from 750 to 1,000 gallons per acre
  • Hardens and compacts treated surfaces with repeated applications
REQUEST PRODUCT INFORMATION

REQUEST QUOTE

tm08509dustnotmc (catalog)

DUSTNOT MC

Synergistic blend of Magnesium Chloride and inhibitors to provide dust control on roads, equipment yards, fly ash ponds, coal piles, parking lots, and other surfaces that become very dusty in dry conditions.  Inherent hydroscopic properties help control moisture levels and prevent dusting during dry periods and between dust suppression treatments. Hardens and compacts treated surfaces with repeated applications.  Saves money by reducing the number of water truck applications, reducing tire replacement, and reducing equipment repair costs.

  • Cumulative effect so each application builds a ground inventory for better long-term results
  • Binds fine dust products and prevents them from becoming airborne
  • Reduces blading frequency by 50% and regravelling by 50%
  • Prevents roads from freezing down to -58°F
  • Prevents erosion and washout
  • Increase safety and visibility
  • Colorless application
REQUEST PRODUCT INFORMATION

REQUEST QUOTE

tm09508teadfastultra (catalog)

STEADFAST ULTRA

4-in-1 road dust treatment.  Hyper-concentrated formulation provides optimum penetration and bonding when applied to fine or granular materials.  Provides dust control to roads, equipment yards, fly ash ponds, coal piles, parking lots, and other surfaces that become very dusty in dry conditions.  Excellent pre-treatment for firming up piles, berms, and slopes prior to treatment with MinCryl X-50.

  • Dries clear and colorless
  • Safe for use in and around sensitive habitats
  • Dilutes at ratios as great as 3 gallons to 1,000 of water
  • Provides erosion resistance, compactibility, and water resistance
  • Superior cohesion and hardness provides long-lasting performance
REQUEST PRODUCT INFORMATION

REQUEST QUOTE

tm09508teadfastultra (catalog)

DUSTNOT CG

Enhances water truck treatments on dirt and gravel roads, haul roads, race tracks, horse rings, cart paths, bike trails, etc.  Extends water by reducing the evaporation rate, thereby reducing the number of water applications required to control dust.  Establishes hydrogen bonds with water to increase moisture retention within soil and rock.  Ideal for many process dust suppression applications including mining, fertilizer manufacturing, coal handing, gypsum handling, limestone handling, etc.

  • Colorless upon addition to water
  • Non-flammable – contains no alcohols
  • Resists freezing down to -13°F in neat form
  • Non-corrosive – contains no salts or chlorides
  • Non-toxic – contains no SARA Title 313 reportables
  • Improves air quality and increases safety and visibility
  • 10-20 gallons per 1000 gallons of water can double treatment intervals

dustnot430waterextender

DUSTNOT 430

Foamable product containing wetting agents used to control dust in the unloading, transfer, and storage of limestone, coal, flyash, iron ore, sulfur, and other friable materials.  High-expansion foam provides maximum coverage with minimal moisture addition in order to reduce BTU loss when treating coal and in order to reduce binding of fines when applied to limestone and other materials prone to caking.  Also excellent as a water-extender in road dust control applications.

  • Non-corrosive, biodegradable, chloride-free, and phosphate-free
  • For use on conveyors, transfer belts, booms, chutes, and feed lines
  • Dilutes 1:100 – 1:400 and applied at 0.3 – 0.7 gallons of solution per ton, typically
  • Long-lasting foam reduces the number of application points required to control dust problems
  • Super wetting chemistry binds fines to larger particles, reducing fugitive dust at the application point and downstream at the point of storage
  • Excellent wetting agent, soil humectant, and water-extender for road dust control programs at dilution rates of up to 1:1000:  reduces water usage by 50%, increases coverage area of each truckload of water, extends duration of dust control, and improves the penetration of water into the roadbed which reduces evaporation
REQUEST PRODUCT INFORMATION

REQUEST QUOTE